Welcome to [ Wuxi Funecon Precision Mould Plastic Co., Ltd. ] website! Home| Sitemap| Email
Moulding Your Future

Enquiry:

138-6185-1071

138-6185-1071

Causes and solutions for surface color and gloss defects of injection mold products

Usually, the surface of the plastic products obtained by this injection molding method has a relatively good gloss and brilliant color, but in the actual injection molding process, many products produced by the injection mold factory have relatively large color and gloss. In addition to the hard factors of plastic materials, colorants and the surface finish of the mold, what are the reasons for this?
(1) The mold has poor finish, the surface of the cavity has rust, etc., and the mold is poorly exhausted.
(2) The casting system of the mold is defective. The cold material well should be enlarged, the flow channel should be enlarged, the main flow channel should be polished, the runner and the gate should be polished.
(3) The material temperature and the mold temperature are low, and the local heating method of the gate can be used if necessary.
(4) The processing pressure is too low, the speed is too slow, the injection time is insufficient, and the back pressure is insufficient, resulting in poor compactness and darkening of the surface.
(5) The plastic should be fully plasticized, but the degradation of the material should be prevented, the heat should be stable, and the cooling should be sufficient, especially thick-walled.
(6) Prevent cold material from entering the part, and if necessary, use a self-locking spring or lower the nozzle temperature.
(7) Excessive recycled materials are used, plastic or colorant is of poor quality, mixed with water vapor or other impurities, and the quality of the lubricant used is poor.
(8) The clamping force should be sufficient.
2018/08/02 10:04:17 1090 次

Hot News

Copy right of the 2018 Wuxi Funecon Precision Mould Plastic Co., Ltd. All Rights Reserved

百变王牌选号技巧 广东十一选五当天计 澳洲幸运10是不是合法 西宁按摩休闲会所 幸运飞艇冠亚单最高倍率平台 如何通过网上写文章 浙江十一选五开奖结果查询结果 辽宁十二选五走势图 福建体彩31选7开奖结果 香港最快开奖现场直播 弈棋耍大牌申城棋牌 山东十一运夺金遗漏360 25选7分布图 福建11选5怎么才能中奖 95至尊app官方下载 河北快3跨度奖金 天津体彩网泳坛夺金